There are many good window/door options out there and the Department of Energy has great advice for consumers when selecting efficient windows and doors.

Materials used in the windows construction will also determine the conductivity of heat or cold transfer into a home. Aluminum or steel windows would conduct the most energy, where as Vinyl windows filled with foam would conduct the less energy.

Windows provide our homes with light, warmth, and ventilation, but they can also negatively impact a home’s energy efficiency. You can reduce energy costs by installing energy-efficient windows in your home. If your budget is tight, energy efficiency improvements to existing windows can also help.

Improving the Energy Efficiency of Existing Windows
You can improve the energy efficiency of existing windows by adding storm windows, caulking and weather-stripping, and using window treatments or coverings.

Adding storm windows can reduce air leakage and improve comfort. Caulking and weatherstripping can reduce air leakage around windows. Use caulk for stationary cracks, gaps, or joints less than one-quarter-inch wide, and weatherstripping for building components that move, such as doors and operable windows. Window treatments or coverings can reduce heat loss in the winter and heat gain in the summer. Most window treatments, however, aren’t effective at reducing air leakage or infiltration.

Cold Weather Window TipsUse a heavy-duty, clear plastic sheet on a frame or tape clear plastic film to the inside of your window frames to reduce drafts.

Selecting New Energy-Efficient Windows

If your home has very old and/or inefficient windows, it might be more cost-effective to replace them than to try to improve their energy efficiency. New, energy-efficient windows eventually pay for themselves through lower heating and cooling costs, and sometimes even lighting costs.

When properly selected and installed, energy-efficient windows can help minimize your heating, cooling, and lighting costs. Improving window performance in your home involves design, selection, and installation.

Design

Before selecting new windows for your home, determine what types of windows will work best and where to improve your home’s energy efficiency. It’s a good idea to understand the energy performance ratings of windows so you’ll know what energy performance ratings you need for your windows based on your climate and the home’s design.

For labeling energy-efficient windows, ENERGY STAR® has established minimum energy performance rating criteria by climate. However, these criteria don’t account for a home’s design, such as window orientation.

Windows are an important element in passive solar home design, which uses solar energy at the site to provide heating, cooling, and lighting for a house. Passive solar design strategies vary by building location and regional climate, but the basic window guidelines remain the same—select, orient, and size glass to maximize solar heat gain in winter and minimize it in summer.

In heating-dominated climates, major glazing areas should generally face south to collect solar heat during the winter when the sun is low in the sky. In the summer, when the sun is high overhead, overhangs or other shading devices prevent excessive heat gain.

To be effective, south-facing windows should have a solar heat gain coefficient (SHGC) of greater than 0.6 to maximize solar heat gain during the winter, a U-factor of 0.35 or less to reduce conductive heat transfer, and a high visible transmittance (VT) for good visible light transfer. See Energy Performance Ratings to learn more about these ratings.

Windows on east-, west-, and north-facing walls should be minimized while still allowing for adequate daylight. It is difficult to control heat and light through east- and west-facing windows when the sun is low in the sky, and these windows should have a low SHGC and/or be shaded. North-facing windows collect little solar heat, so they are used only for lighting. Low-emissivity (low-e) window glazing can help control solar heat gain and loss in heating climates.

In cooling climates, particularly effective strategies include preferential use of north-facing windows and generously shaded south-facing windows. Windows with low SHGCs are more effective at reducing cooling loads.

Some types of glazing help reduce solar heat gain, lowering a window’s SHGC. Low-e coatings—microscopically thin, virtually invisible metal or metallic oxide layers deposited directly on the surface of glass—control heat transfer through windows with insulated glazing. Tinted glass absorbs a large fraction of incoming solar radiation through a window, reflective coatings reduce the transmission of solar radiation, and spectrally selective coatings filter out 40% to 70% of the heat normally transmitted through insulated window glass or glazing, while allowing the full amount of light to be transmitted. Except for spectrally selective, these types of glazing also lower a window’s VT. See Window Types to learn more about glazing, coatings, tints, and other options when selecting efficient windows.

If you’re constructing a new home or doing some major remodeling, you should also take advantage of the opportunity to incorporate your window design and selection as an integral part of your whole-house design—an approach for building an energy-efficient home.

Selection

You’ll find that you have several options to consider when selecting what type of windows you should use in your home.

When selecting windows for energy efficiency, it’s important to first consider their energy performance ratings in relation to your climate and your home’s design. This will help narrow your selection. Select windows with both low U-factors and low SHGCs to maximize energy savings in temperate climates with both cold and hot seasons. Look for whole-unit U-factors and SHGCs, rather than center-of-glass (COG) U-factors and SHGCs. Whole-unit numbers more accurately reflect the energy performance of the entire product. A window’s energy efficiency is dependent upon all of its components. Window frames conduct heat, contributing to a window’s overall energy efficiency, particularly its U-factor. Glazing or glass technologies have become very sophisticated, and designers often specify different types of glazing or glass for different windows, based on orientation, climate, building design, etc.

Another important consideration is how the windows operate, because some operating types have lower air leakage rates than others, which will improve your home’s energy efficiency. Traditional operating types include: